Description; Operation - Stiga HT 48 Li Manual De Instrucciones

meaning. Proper interpretation of these symbols
will allow you to operate the tool better and safer..
Precautions that involve your
safety.
Read the operation manual and
follow all warnings and safety
instructions.
Wear eye protection and ear
protection.
Wear non-slip, heavy
duty gloves.
Sharp cutting blades. To
prevent serious injury, do not
toucht he cutting blades.
Do not expose to rain
or damp conditions.
The following signal words and meanings
are intended to explain the levels of
risk associated with this product..
Indicates an imminently
hazardous situation, which,
if not avoided, will result in
death or serious injury.
Indicates a potentially
hazardous situation, which,
if not avoided, could result
in death or serious injury.
Indicates a potentially
hazardous situation, which,
if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol)
Indicates a situation that may
result in property damage.

4. DESCRIPTION

Blade cover
Blade
Guard
Sensor switch
Front handle
Battery pack
Trigger lock button
Trigger
Rotate button
Model label
10.1 CE conformity marking
10.2 Name and address of Manufacturer
10.3 Sound power level .....
10.4 Article code
10.5 Type of machine
10.6 Serial number
10.7 Year of manufacture
10.8 Power voltage and frequency
As soon as you have purchased the machine, do
not forget to write the identification numbers (S/n)
in the spaces on the last page of the manual.
The example of the conformity declaration is
found in the penultimate page of the manual.

5. OPERATION

For complete charging instructions,
refer to the perator's Manuals for your
battery pack and charger models.
NOTE To avoid serious personal injury,
always remove the battery pack and keep
hands clear of the lock-out button when
carrying or transporting the tool.
INSTALL BATTERY PACK
See Figure 2.
• Place the battery pack in the hedge
trimmer. Align raised rib on battery
pack with groove in hedge trimmer.
• Make sure the latch on the battery pack snaps
in place and that battery pack is secured in
hedge trimmer bofore beginning operation.
REMOVE BATTERY PACK
See Figure 2.
Locate the latch on the battery pack
and depress to release the battery
pack from the hedge trimmer.
When placing battery pack in your
.
hedge trimmer, be sure raised rib on
battery pack aligns with groove in hedge
trimmer and latch snaps in place properly.
Improper assembly of battery pack can
cause damage to internal componets.
STARTING THE HEDGE TRIMMER
See Figure 3.
• Remove the blade cover.
• For added safety, there is a micro switch
in the fronthandle. When operating, hold
the trimmer with both hands, one hand
to pull the trigger lock button backward
and squeeze the trigger, and the other
hand to squeeze the front handle.
5