Data Bits; To Choose U.wt Recomputing; Backlight Mode - Giropes Baxtran BAP Manual Del Usuario

Press the or
Then press the key to confirm and move to next setting or press the

5.5 DATA BITS

The display show as below:
Press or
Press the or
(bit.e7) or 8 (bit.n8)). (Default: 8)
bit.e7: data bits 7, even parity bit
bit.n8: data bits 8, no parity bit
Then press the

5.6 TO CHOOSE U.WT RECOMPUTING

The display show as below:
AC Y
Press or
Press the or
Then press the key to confirm and move to next setting or press the

5.7 BACKLIGHT MODE

The display show as AUTO/ OFF / ON
AUTO
Press or
Press the or
key to choose the desired baud rate: "1200" , "2400" , "4800" or "9600" . (Default: 9600)
key to move to last setting or next setting; or press
key to choose the data bits to be 7
key to confirm and move to next setting or press the
key to move to last setting or next setting; or press
key to chooseto be enabling (y) or disabling (n). (Default: n)
key to move to last setting or next setting; or press
key to choose the backlight mode: AUTO, OFF and ON. (Default: AUTO)
USER MANUAL BAR
key to move to next setting.
key to enter into current setting.
key to move to next setting.
key to enter into current setting.
key to move to next setting
key to enter into current setting.
EN EN
13