Giropes Baxtran BAP Manual Del Usuario página 9

1. Open the rubber seal on the bottom of the balance.
2. Install the hanging hook.
A. CHOOSE WATER'S TEMPERATURE.
Use the thermometer to test water's temperature in current situation. Use
key to choose the corresponding temperature value. Press
key to confirm.
B. Then the display shows the water's density under the temperature you have chosen.
And press key to confirm.
For example: 0.99705ρ-L
r-L: Indicate water density
Rubber Seal
Hole for hanging hook
NO INCLUDED
(The default value: 25 Cº)
USER MANUAL BAR
or
ENTER
EN EN
9