Features And Controls - Briggs & Stratton TROY-BILT 01903 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Features and Controls
2
KNOW
YOUR
PRESSURE
WASHER
Read this owner's manual
and safety rules
before
operating
your pressure
washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and
adjustments. Savethis manual for future reference.
Pump equipped with
Automatic Coot Down System
Air Filter
Throttle Lever
Choke Rod
Recoil Starter
(on front of engine)
\
FuelTank
Accessory Tray
Spray Gun
Nozzle Extension
with Quick
Connect
Spray Tips
Water Inlet
Chemical Injection
Siphon/Fitter
Data Tag f
Accessory
Tray _
Provides convenient storage for
standard and optional accessories, such as brushes, turbo
wands, etc.
Air Filter -- Protects
engine
by filtering
dust and debris out
of intake air.
Automatic
Cool Down System -- Cycles w_ter through
pump
when
water
reaches
125 % 155_F. Warm
water
will
discharge from pump onto ground. This system prevents
internal
pump
damage.
Chemical
Injection Siphon/Filter
-- Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke
Rod -- Prepares a cold engine for starting.
Data Tag --
Provides model, revision and serial number
of pressure washer. Please have these readily available if
calling for assistance.
Fuel Tank -- Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
Fill C ap
High Pressure Outlet
High Pressure
Hose (not shown) -- Connect one end to
the water pump and the other end to the spray gun.
High Pressure
Outlet
-- To connect high pressure hose.
Nozzle
Extension with Quick Connect -- Allows you to
switch between four different spray nozzles.
Oil Fill Cap --
Fill engine with oil here.
Pump --
Develops high pressure.
Recoil Starter
-- Use for starting the engine manually.
Safety
Goggles (not
shown)
--
Always use the enclosed
goggles or other eye protection
when running your
pressure washer.
Spray Gun -- Controls the application of water onto
cleaning
surface
with
trigger
device.
Includes
safety
latch.
Spray Tips -- Chemical injection, 0°, t5 °, and 40°: for
various high pressure
cleaning
applications.
Throttle
Lever_Sets
engine in
starting
mode for recoil
starter
and
stops
a running
engine.
Water
Inlet
--
Connect
garden
hose
here.

Publicidad

Tabla de contenido
loading

Tabla de contenido