Features and Controls
Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - Warning/Operating Instructions Tag — Identifies
hazards and proper procedure to start/stop pressure
washer.
C - Adjustable Nozzle — Always attached to nozzle
extension. Adjustable nozzle allows you to adjust spray
pressure and spray pattern.
D - Recoil Starter — Used for starting the engine manually.
E - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
F - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
G - Choke Lever — Prepares a cold engine for starting.
H - Air Filter — Protects engine by filtering dust and debris
out of intake air.
J - Pump — Develops high pressure.
K - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F (51°C-68°C).
Warm water will discharge from pump onto ground. This
system prevents internal pump damage.
L - High Pressure Outlet — Connection for high pressure
hose.
M - Water Inlet — Connection for garden hose.
N - Oil Fill/ Dipstick — Check and fill with oil here.
P - Cleaning Tank — Use to hold up to one gallon (3.78 l)
of pressure washer detergent.
R - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
Items Not Shown:
Data Tag (near rear of base plate) — Provides model and
serial number of pressure washer. Please have these readily
available if calling for assistance.
R
P
N
L
M
,
J
K
,
9