Features And Controls - Briggs & Stratton BRUTE 020513-00 Manual Del Operador

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
K
A - Nozzle Extension with Quick Connect — Allows you to
switch between three different spray tips.
B - Spray Tips — Detergent, 0°, and 25°: for various high
pressure cleaning applications.
C - Recoil Starter — Used for starting the engine manually.
D - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
E - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
F - Air Filter — Protects engine by filtering dust and debris
out of intake air.
G - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
H - Detergent Siphoning Tube — Use to siphon pressure
washer safe detergents into the low pressure stream.
J - High Pressure Outlet — Connection for high pressure
hose.
K - Water Inlet — Connection for garden hose.
L - Pump — Develops high pressure.
M - Oil Fill/Dipstick — Check and add engine oil here.
N - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
P - Accessory Tray — Provides convenient storage for
nozzle extension, spray gun and high pressure hose.
R - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger
lock.
Items Not Shown:
Identification Label (near rear of base plate) — Provides
model and serial number of pressure washer. Please have
these readily available if calling for assistance.
Warning/Operating Instructions Tag — Identifies hazards
and proper procedure to start/stop pressure washer.
R
P
N
M
L
11