Features And Controls - Briggs & Stratton Speed Clean Manual Del Operario

Features and Controls

Read the Operator's Manual and safety rules before operating your electric pressure washer.
Compare the illustrations with your electric pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this original manual for future reference.
A
B
C
D
A - Spray Gun — Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
B - Master ON/OFF Toggle Switch — Push top of switch in ( | )
to turn pressure washer ON. Push Bottom of switch in (O) to
turn pressure washer OFF.
C - Electric Cord with GFCI — The electric pressure washer and
operator is protected by a ground fault circuit interrupter
(GFCI).
D - Water Supply Inlet — Connect to water supply using a 50 ft.
(15.24 m) maximum garden hose.
E - Warning Labels — Identifies hazards to be avoided when
using your pressure washer.
F - Accessory Tray — Provides convenient storage for standard
and optional accessories.
G - High Pressure Hose — Connect one end to high pressure
water outlet and the other end to spray gun.
12
F
G
E
H
J
K
H - Foam Lance — Used with adjustable fan jet wand to apply
detergent to surfaces.
J - Nozzle Cleaner — Used to remove sediment and clogs from
nozzle.
K - High Pressure Water Outlet — Connection for high pressure
hose.
M - Identification Label — Provides model and serial number of
pressure washer. Please have these readily available if calling
for assistance.
N - Turbo Wand — Whirls a powerful pin-point jet of water for
intense cleaning.
P - Adjustable Fan Jet Wand — Allows adjustment of spray
pattern for various high pressure applications.
M
BRIGGSandSTRATTON.COM
P
N