Safety Instructions - Bosch GBH 2-24 DS Manual Del Usuario

Safety Instructions

Warning! When using electric tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury, including the
following. Read all these instructions before attempting to operate this product
and save these instructions.
For safe operation:
1. Keep work area clean
Cluttered areas and benches invite injuries.
2. Consider work area environment
Don't expose power tools to rain. Don't use power tools in damp or wet locations. Keep
work area well lit. Don't use power tools in presence of flammable liquids or gases.
3. Guard against electric shock
Prevent body contact with grounded surfaces (e. g. pipes, radiators, ranges
refrigerators).
4. Keep children away
Do not let visitors contact tool or extention cord. All visitors should be kept away from
work area.
5. Store idle tools
When not in use, tools should be stored in dry, high, or locked-up place, out of the
reach of children.
6. Don't force tool
It will do the job better and safer at the rate for which it was intended.
7. Use right tool
Don't force small tools or attachments to do the job of a heavy duty tool. Don't use tools
for purposes not intended; for example, don't use circular saw for cutting tree limbs or
logs.
8. Dress properly
Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber
gloves and nonskid footwear are recommended when working outdoors. Wear
protective hair covering to contain long hair.
9. Use safety glasses
Also use face or dust mask if cutting operation is dusty.
10. Don't abuse cord
Never carry tool by cord or yank it to disconnect it from receptacle. Keep cord from
heat, oil and sharp edges.
11. Secure work
Use clamps or a vise to hold work. It's safer than using your hand and it frees both
hands to operate tool.
12. Don't overreach
Keep proper footing and balance at all times.
13. Maintain tools with care
Keep tools sharp and clean for better and safer performance. Follow instructions for
lubricating and changing accessories. Inspect tool cords periodically and, if damaged,
have repaired by authorized service facility. Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean and free from oil and grease.
14. Disconnect tools
When not in use, before servicing, and when changing accessories such as blades, bits
and cutters.
15. Remove adjusting keys and wrenches
Form the habit of checking to see that keys and adjusting wrenches are removed from
tool before turning it on.
16. Avoid unintentional starting
Don't carry plugged-in tool with finger on switch. Be sure switch is off when plugging in.
17. Outdoor use extension cords
When tool is used outdoors, use only extension cords intended for use outdoors and
so marked.
18. Stay alert
Watch what you are doing. Use common sense. Do not operate tool when you are tired.
19. Check damaged parts
Before further use of the tool, a guard or other part that is damaged should be carefully
checked to determine that it will operate properly and perform its intended function.
Check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting, and any other conditions that may affect its operation. A guard or other part
that is damaged should be properly repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in this instruction manual. Have defective
switches replaced by an authorized service center. Do not use tool if switch does not
turn it on and off.
20. Warning
The use of any other accessory or attachment other than recommended in this
operating instruction or the Bosch catalog may present a risk of personal injury.
21. Have your tool repared by an expert
This electric appliance is in accordance with the relevant safty rules Repairing of electric
appliances may be carried out only by experts other wise it may cause considerable
danger for the user.
17