Declaration Of Conformity; Changing The Tool - Bosch 3 601 B30 0 Serie Manual De Instrucciones

OBJ_BUCH-1271-004.book Page 15 Tuesday, February 14, 2012 11:38 AM
Vibration total values a (triax vector sum) and uncertainty K deter-
h
mined according to EN 60745:
Sanding:
a
h
K
Sawing with plunge cut saw blade:
a
h
K
Sawing with segment saw blade:
a
h
K
Scraping:
a
h
K
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or poorly main-
tained, the vibration emission may differ. This may signifi-
cantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Engineering Director
Engineering PT/ESI
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 20.01.2012
Bosch Power Tools
GOP 250 CE
2
m/s
2
m/s 1.5
2
m/s 10
2
m/s 1.5
2
m/s 6.5
2
m/s 1.5
2
m/s 4.5
2
m/s 1.5
Assembly

Changing the Tool

Before any work on the machine itself, pull the mains
plug.
Wear protective gloves when changing application
tools/accessories. Contact with the application tool/
accessoriy can lead to injuries.
Selecting the Application Tool/Accessory
Accessory
HCS wood seg-
ment saw blade*
BIM segment saw
blade*
HCS plunge cut
saw blades,
wood*
BIM plunge cut
saw blades,
metal*
BIM plunge cut
saw blade, wood
and metal*
HM-Riff segment
saw blade*
HM-Riff delta
plate*
Scraper, rigid*
* Optional accessory; for the complete accessories please see Bosch
accessory programme.
English | 15
GOP 300 SCE
2 3
1.5
10
1.5
5
1.5
5
1.5
Material
Wooden materials,
plastic
Wooden materials,
plastic, non-ferrous
metals
Wooden materials,
plastic, gypsum and
other soft materials
Metal (e.g. unhard-
ened nails, screws,
smaller profiles),
non-ferrous metals
Wood, metal, non-
ferrous metals
Grouting joints, soft
wall tiles, glass-fibre
reinforces plastic
and other abrasive
materials
Carpets, coverings
2 609 932 802 | (14.2.12)