Safety Recommendations - THOMSON MIC100BT Manual Del Usuario

Microcadena
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Carefully read the instructions of this manual, respecting recommendations for use and safety. Keep this document and
tell potential users about it.
This appliance has been designed solely for domestic use; the manufacturer's liability shall not be engaged in the event of
any professional use, any misuse or any use not complying with the operating instructions.
This symbol, representing a lightning bolt inside
an equilateral triangle, is intended to alert the
user to the presence of uninsulated, dangerous
voltage in the product's enclosure that is high
enough to present a risk of electrical shock.
This symbol, representing an exclamation mark
inside an equilateral triangle, is intended to
alert the user to the presence of operating and
maintenance instructions in the documentation
accompanying the product.
This symbol complies with the standards in
force for this type of product.
Disposing of the appliance at the end of its life
This appliance bears the WEEE mark (Waste of
Electric and Electronic Equipment) signifying
that, at the end of its life cycle, it should not
be disposed of with household waste, but at a
recycling centre.
The recycling of waste contributes to the
conservation of our environment.
Disposing of batteries at the end of their life
In order to respect the environment, do not
throw used batteries out with household waste.
Dispose of them at your nearest recycling
centre or at a used battery collection point.
ATTENTION: This symbol
indicates that this appliance is a
Class 1 Laser product.
CLASS 1 LASER PRODUCT
look at the laser beam.
inside the compartment.
MICRO SYSTEM
MIC100/MIC101
MIC100BT
Do not try to open the cover or
Never touch the laser lens

SAFETY RECOMMENDATIONS

WARNING CONCERNING USE AND INSTALLATION
not expose the appliance to rain or humidity. Therefore,
the appliance should not be used near a water supply
point or in a humid location (bathroom, swimming pool,
sink, etc).
ATTENTION: Never immerse the appliance in water or in
any liquid whatsoever.
etc.) on the appliance.
heating equipment or any heat source, or in a location
The appliance is designed for use in moderate climates.
ash tray, etc.) close to the appliance.
stable.
designed to work solely in a horizontal position.
ventilation to avoid internal overheating. Avoid
restricted spaces such as bookcases, cabinets, etc.
a carpet or blanket, that might block the ventilation
openings.
the appliance unsupervised.
ren insert for
appliance.
ffect of electrostatic and/or fast electrical
transient phenomena, the product may not operate
properly and will need to be reset by the user.
with powerful magnets, such as microwave ovens or
powerful loudspeakers.
this could damage it and affect the disk. Remove the
disk before you move the appliance.
to a hot location, condensation may form on the
lens located inside the disk compartment. Leave the
appliance for at least 30 minutes before switching it on.
remote control sensor to bright light.
reme temperatures.
roduces heat (candle,
's ventilation openings.
ren to use
rom appliances
re using it, since
rectly from a cold location
7
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mic100Mic101

Tabla de contenido