Care And Maintenance - Danby DBC039A1BDB Guía De Utilización Y Cuidado Para El Propietario

Care and Maintenance

CLEANING
Cleaning the Inside:
• Walls, fl oor, inside window and shelves - Some water deposits and dust can be removed with a
dry paper towel, others may require a damp cloth.
Cleaning the Outside:
• Outer Case - It is important to keep the area clean where the door seals against the cabinet.
Clean this area with a soapy cloth. Rinse with a damp cloth and let dry.
• Control Panel and Door - Wipe with a damp cloth and dry thoroughly. Do not use cleaning
sprays, large amounts of soap and water, abrasive or sharp objects on the panel, they can dam-
age it. Some paper towels may also scratch the control panel and glass on the door.
• Door Surface - Use only mild, non-abrasive detergents applied with a clean sponge or soft cloth.
Rinse well with damp cloth.
NOTE: Do not use cleaners containing ammonia or alcohol on the wine cooler. Ammonia or alcohol
can damage the appearance of the appliance.
NOTE: Never use any commercial / abrasive cleaners or sharp objects on any part of the wine cooler.
POWER FAILURE
• Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the door is opened. If the power is going to be off
for a longer period of time, you need to take the proper steps to protect your contents.
VACATION TIME
• Short vacations: Leave the appliance operating during vacations of less than three (3) weeks.
• Long vacations: If the appliance will not be used for several months, remove all items and turn
off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave
the door open slightly, blocking it open if necessary.
ENERGY SAVING TIP
• The unit should be located in the coolest area of the room, away from heat producing appliances,
and out of direct sunlight
MOVING YOUR WINE COOLER
• Remove all items.
• Securely tape down all loose items (shelves) inside your appliance.
• Turn the adjustable leg up to the base to avoid damage.
• Tape the door shut.
• Be sure the appliance stays secure in the upright position during transportation. Protect the out-
side of the appliance with a blanket or similar item. If it is necessary to transport the unit on its
back or side, ensure that the unit is allowed to stand upright and undisturbed for a minimum of 4
hours to allow the coolant to settle.
.
8