Door Reversal - Danby DBC039A1BDB Guía De Utilización Y Cuidado Para El Propietario

Operating Instructions

DOOR REVERSAL

Tools required:
• Phillips #2 screwdriver
• Adjustable wrench
1. Pull out the screw covers and unscrew the decorative cover. Fig. A
2. While holding the door fi rmly, loosen and remove the top hinge, lift up and remove the door. Fig. B
3. Unscrew the lower hinge. (8)
4. Remove the long cabinet leg (9) on the left side and shift it to the right side. Fig. C
5. Install the lower hinge and tie it with the bolts.
6. Install the door on the axis of the lower hinge on the right.
7. Reinstall the decorative cover and rubber cover.
NOTE: Avoid putting the unit on its back. If you need to put the unit on its back, ensure that you allow
it to stand upright and undisturbed for a minimum of 4 hours to allow the coolant to settle.
1. Rubber cover
2. Screw
3. Decorative cover
4. Screw
5. Top hinge module
6. Door
7. Screw
8. Lower hinge module
9. Short cabinet leg
7