Trimming With Comb - Philips OneBlade QP2520/70 Manual De Instrucciones

ENGLISH
8
Edging
You can also use both edges of the blade to create sharp lines and perfect
edges. Hold the appliance in such a way that the blade is perpendicular to
the skin and one of its edges touches the skin. This allows more precise
detailing of sideburns and the area around the mouth and nose.
1 To use the blade for creating sharp edges and lines, use either edge
of the blade.
2 Switch on the appliance.
3 Place the edge of the blade perpendicular onto the skin.
- Make straight strokes while applying gentle pressure.
4 Switch off and clean the appliance (see 'Cleaning and maintenance')
after every use.

Trimming with comb

The click-on stubble combs allow you to trim hair to different lengths.
QP2531, QP2530 come with 4 click-on stubble combs: 5mm, 3mm,
2mm, 1mm.
QP2520 comes with 3 click-on stubble combs: 5mm, 3mm, 1mm.
QP2522, QP2521 come with 2 click-on stubble combs: 5mm, 1mm.
Start with the 5mm comb to acquire practice with this appliance.
The indication on each comb corresponds to the hair length in millimetres.
1 Place the comb onto the blade. You can attach and use the combs
with the teeth pointing upwards or downwards.
Note: Always trim in the direction of the teeth of the comb.
2 Switch on the appliance.
3 Place the comb onto the skin and move the appliance in the
direction of the teeth of the comb.
Note: For the best result, move it against the grain.