Tripp-Lite P131-000-A Guia De Inicio Rapido página 3

Installation
Note: Make sure that all devices you are connecting
are powered off prior to installation.
1 Connect the HDMI connector to an HDMI
2 Connect the VGA cable to the adapter's VGA
3 Connect a 3.5 mm audio cable from the
4 Power on the connected devices. If the unit
17-05-152-933710.indb 3
source.
port and a VGA display.
unit's audio jack to the audio-in jack on the
monitor or speakers.
does not receive a signal after powering on
the devices, connect a USB cable from the
adapter's USB Micro-B port to the USB-A
port on a USB charger or HDMI source.
3
5/23/2017 10:05:51 AM