Kohler SPUN GLASS VESSELS K-2276 Instrucciones De Instalación página 3

Turn off the water supply to the faucet.
Open the faucet valves to relieve water pressure, then
disconnect the supply lines.
Disconnect the drain assembly, and remove the trap.
Remove the existing lavatory.
Cut the template on the cut-out line labeled "Self-Rimming
Cut-Out".
Position the template on the countertop to ensure
clearance between the lavatory, faucet, and backsplash.
Verify cabinet clearance beneath the countertop.
Use a pencil to trace the template on the countertop.
Re-check the clearance between the lavatory, faucet,
backsplash, and cabinet. Adjust the traced cut-out line
accordingly.
Mark the faucet and handle centerline on the countertop.
Cut out the opening by carefully following the pencil line.
Kohler Co., Kohler, WI U.S.A.
Faucet
Template
3
Supply Lines
Shut-Off valve
Drain Assembly
Fig. #6
Fig. #7
Trace The Template
Cut-Out
Fig. #8
1010430-2-
A