Intended Use - Worx WG209E Manual Del Usuario

tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5. SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
SAFETY WARNINGS FOR
HEDGE TRIMMER:
1. Keep all parts of the body away from the
cutter blade. Do not remove cut material
or hold material to be cut when blades are
moving. Make sure the switch is off when
clearing jammed material. A moment of
inattention while operating the hedge trimmer
may result in serious personal injury.
2. Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge trimmer
always fit the cutting device cover. Proper
handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
8
3. Keep cable away from cutting area. During
operation the cable may be hidden in shrubs and
can be accidentally cut by the blade.
4. Hold the power tool by insulated gripping
surfaces only, because the cutter blade
may contact hidden wiring or its own cord.
Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
5. Check the hedge for foreign objects, e.g. wire
fences.
6. Use both hands when operating the hedge
trimmer. Using one hand could cause loss of
control and result in serious personal injury.
7. Recommendation for the use of a residual current
device with a tripping current of 30 mA or less.
Hedge trimmer
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Wear eye protection
Wear ear protection
Wear dust mask
Do not expose to moisture
Remove plug from the mains
immediately if the cable is damaged or
cut
Double insulation
Keep hands away
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
OPERATING INSTRUCTIONS
WARNING! Do not use the product without
attaching the guard and front handle.

INTENDED USE

This machine is intended to be used domestically
for cutting and trimming hedges and bushes.
1. ASSEMBLY OF THE GUARD (See Fig. A)
Insert the Safety Guard(5) into the slot as illustrated
in Fig A.;
Use two screws to fix the guard securely.making
sure it is securely attached.
EN