ratiotec RS 2000 Manual Del Usuario página 7

Brief Instruction Manual RS 2000 Money Scale
Auto-Add / Auto-Continue
The functions Auto-Add and Auto-Continue, activated from factory, allow an automatic run of
the counting process, starting with the lowest denomination of the selected currency (also in
descending order) and adding each counting result to a total sum.
PACKAGES: Coin rolls, coins in bags or banknote bundles
Using this function you may count (customized) coin rolls and banknote bundles. In the SETUP Menu, you can choose
the option "PACKAGES". Press < or > to activate „ON" or deactivate „OFF" this function and then confirm selection with
OK. If this function is activated, the standard weight of EUR and CHF coin rolls, as well as GBP plastic bags , will be
used. Select CONFIGURE to introduce any desired weight.
Count banknotes
Start adding banknotes by putting ca. 15 banknotes per step (do not remove the banknotes that have already been
placed on the scale!). The dynamic weighing funtion of the RS 2000 allows the user to place up to 25 banknotes at
once, since it recognizes the respective weight after a short period of time.
Error code:
OVERLOAD TOO MUCH WEIGHT: Remove the complete weight from the scale and restart the counting process using
a smaller amount.
REMOVE 10 PIECES / REMOVE SOME: Remove some of the last banknotes placed and continue the weighing process.
REMOVE ALL: Remove all banknotes and count them again step by step.
Count coins
1. Fill coin cup with the respective coins.
2. Place cup on Money Scale.
Tip: Your cash-drawer cups will enable a faster counting process!
ca. 15 + ca. 15 + ca. 15 = 45
Kopfzeile [EN]
7