Uline H-2058 Manual Del Usuario página 2

Figure 1
Figure 2
Release Lever
Figure 3
Drawer Track
PAGE 2 OF 18
ASSEMBLY
LEG ASSEMBLY
1. Place desk top on a smooth, non-marring surface
with top side facing down.
2. Attach front legs using four large bolts and four large
nuts on each leg. (See Figure 1) Attach back legs
using four large bolts and four large nuts on each
leg.
NOTE: Door hinges must face inward when
attaching front legs.
DRAWER ASSEMBLY
1. Remove drawer slides from the outsides of the
drawer. Press the drawer slide release lever to
remove slides completely. (See Figure 2)
NOTE: Depending on the side, press release
lever either down or up to remove slides.
2. Attach drawer slides to drawer tracks using two small
bolts, washers, lock washers and nuts. Extend drawer
slide completely to attach to track. Insert center bolt
first to align front bolt hole. (See Figure 3)
0221 IH-2058