Mhouse RT3N Instrucciones Y Advertencias Para La Instalación Y El Uso página 15

B Power the receiver and wait for the initial
beeps
Ë
• With the transmitter in mode I or not
1
memorized: Press and hold down key n
(or 2) of the transmitter until you hear a
beep (after about 5 seconds) then release
it.
• With the transmitter in mode II: Press
and release the memorized key.
If the motor should start moving, press
the key again and hold it down until you
hear a beep (after about 5 seconds), then
release it
After 1 second, press the s key and
2
release it precisely during the third beep
After 1 second, press the n key and
3
release it precisely during the third beep
Ë
After 1 second, press the t key and
4
release it precisely during the third beep
Ë
5 If you wish to completely erase all the data
stored in the memory, press keys s and
t simultaneously within 2 seconds and
then release it
After a few seconds, 5 beeps will signal
that the memory has been cleared
5s
?... 5s
English – 13