Mhouse RT3N Instrucciones Y Advertencias Para La Instalación Y El Uso página 7

Memorizing the transmitters in Mode I (simplified memorization) Key s
(1) can perform the "Ascent" command, key n (2) performs the Stop com-
mand, whereas key t (3) can perform the "Descent" command; on trans-
mitter GTX4 key 4 performs the Stop command.
Functions of the transmitter keys in Mode I
STX1 GTX4
Key s
Key 1
Key n
Key 2
Key t
Key 3
Key 4
When there are no memorized transmitters you can proceed to program the
first transmitter in Mode I as shown in table [A].
Memorizing the first transmitter in
Table [A]
Mode I
1 Power the RC1 receiver: you will hear
two long beeps
2 Within 5 seconds press any key on the
radio transmitter to be memorized and
hold it down
3 Release the key when you hear the first
of the 3 beeps confirming memorisation
If the receiver has already memorized one or more transmitters, 3 short beeps
will be heard when it is switched on. In this case you will not be able to proceed
as described above, but will have to switch to the memorization mode described
in Table [B]
Command
Ascent
Stop
Descent
Stop
STX1
Example
GTX4
5s
English – 5