Publicidad
17
Technical Information
Pump Description
A thermistor sensor is mounted near the upper bearing to prevent
the pump from overheating.
The pump is balanced after assembly with a residual vibration
amplitude less than 0.01 µm.
The pump can operate in any position and can be supported on the
high vacuum flange. The connection of the forevacuum on the side of
the pump is a KF 25 NW flange (8698961R002 model) and a KF 40
NW flange (8698962R001 model).
248/304
Turbo-V 1K-G User Manual / 87-901-025-01 (A)
Publicidad
Capítulos
