Team kalorik CM1019 Manual Del Usuario página 7

12. Always switch the coffee maker to M (means OFF) when the carafe is empty or you no
longer want to keep coffee hot. The coffee maker will shut off automatically after 40
minutes.
13. If two (2) or more pots of coffee are to be made it is recommended that the coffee
maker be allowed to cool for 10 minutes between each brewed pot. The filter should
also be rinsed out after each brew cycle.
MAKE COFFE IMMEDIATELY
1. Press M/A (means ON/OFF) button, Coffee maker will brewing coffee immediately, red
LED light will be flashing to indicate the brewing process, when red LED light constantly
means keep warming time, The coffee maker will shut off automatically after 40 minutes.
2. If you want to stop making coffee while brewing time, press M/A (means ON/OFF) again
to stop making coffee.
SETTING Auto-brew Model.
1. Before brewing .press the HEURE and then the MIN buttons to set the current time. Press
and hold the buttons to scroll through numbers quickly. When the number displayed
approaches the desired setting, press and release the button to advance one digit at a
time.
2. To set the desired auto brew start time, first press the PRO button. Next set the time you
want coffee to begin brewing by using the HEURE and MIN buttons following the same
directions for setting the clock, After setting, machine was in auto-brew mode, green
light will flash, word" AUTO" will show in the LCD screen.
3. Your coffee maker will automatically begin brewing at the pre-set time. When the brew
cycle begins, the red light will flash to indicate the coffee maker is in operation.
4. Press the PRO button about 3 second to cancel the Pre-set Model.
PAUSE & SERVE
Allows you to interrupt the brewing cycle and pour a cup of coffee before the entire carafe is
finished brewing.
CAUTION: You can take out carafe, pour and serve at any time. The appliance will stop
dripping automatically. But the time cannot exceed 30 seconds.
Make sure the carafe is positioned firmly against the back of the coffee maker.
NOTE: While the pause and serve is a convenient way to pour a cup of coffee mid-cycle, we
recommend you wait until the completion of the brew cycle as the strength of coffee poured
mid-cycle may vary from finished brew, and will affect finished brew's strength and flavour.
CLEANING AND MAINTENANCE
Before cleaning, always: switch off the appliance, disconnect the apparatus and let it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
The parts (removable) in contact with food like plate, bowl, forks, Spatula etc. can be
washed in hot water with sponge and soft detergent or put in the dishwasher.
Never plunge the apparatus in water or all other liquid !
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
CLEANING YOUR COFFEEMAKER
1. Always unplug the coffeemaker & allow cooling before cleaning.
6