Seca 757 Manual De Instrucciones página 19

8. What do I do if...
... no weight display comes on?
– Is the scale switched on?
– Is the plug contact of the mains unit properly connected to the scale?
0. 0 0
... does not appear before weighing?
– Press the Start key again.
0. 0 0
... appears before weighing instead of - - - - ?
– Press the Start key again.
– Press the NET key to tare the scale again.
... the weight display is flashing?
– The HOLD function has not been activated because the baby is moving around too
much on the scale. Press the HOLD key again.
... one segment is illuminated constantly or not at all?
– The relevant segment has a fault. Inform Servicing.
batt
... appears in the display?
– The rechargeable battery is so severely discharged that weighing is no longer possible.
Recharge the battery.
St0p
... appears in the display?
– Maximum load has been exceeded.
EEEEE
... the display
– Has the scale been started with the transport securing device in place? Remove the
transport securing device (see "Removing transport securing device" on page 14).
– Scale has been loaded well beyond the permitted weighing range (see "Correct weigh-
ing" on page 17).
– A fault has occurred in the electronics. Inform the Service Department.
9. Servicing/recalibration
Have the scale recalibrated by authorised persons in accordance with national legal re-
quirements. The year of initial calibration can be found behind the CE symbol on the rating
plate above the number of the appointed office, 0109 (Hessen Weights & Measures Of-
fice). Recalibration is essential if one or more security marks are damaged.
We recommend having your scale serviced by your local service agent before having it
recalibrated. seca Customer Service will be pleased to give you further assistance.
Model 757
appears?
19
GB