Configuring The Camera - D-Link DCS-4612EK Manual Del Usuario

Configuring the Camera

1. Ensure that your camera is plugged in
(either using a 12 V 1.5 A power adapter
or a PoE-enabled device) and connected
to your computer with an Ethernet cable.
2. Open the Setup Wizard. It will display
the MAC address and IP address of your
camera. If you have a DHCP server on your
network, this will be a dynamic IP address.
If your network does not use a DHCP
server, the network camera' s default static
IP 192.168.0.20 will be displayed. Select
your camera, then click the Link button to
continue.
Figure 4: Launching the Setup Wizard
3. If this is your first time logging in, you will be
prompted to create a password, which must
be between 8 and 30 characters and must
contain both letters and numbers. Press OK.
Figure 5: Creating a Password
Quick Installation Guide
4. To view the camera display, on the main
screen of the Setup Wizard, click the
Search button, then select your camera
and click the Link button to open the
camera's web UI. Alternatively, open a
web browser and type the camera's IP
address (displayed in step 2) into the URL
bar and press Enter. Enter the password
you created, and click Login to continue.
Figure 6: Authenticating
Installing D-ViewCam
1. Open a web browser, navigate to
dlink.com/support/, and select your
region.
2. On the next screen, click the D-ViewCam
link and click the most recent version to
download the D-ViewCam setup wizard
(packaged as a zip file).
3. Once the file has finished downloading,
unzip it, and click the executable file
SetupTool.exe. Follow the instructions
to install the D-ViewCam software suite.
For advanced viewing options, refer to the
D-ViewCam User Manual.
3