Kohler K-7344 Manual Del Usuario página 5

Valve Body
Outlet
Sidespray
Hose Intlet
3" (76 mm)
or Larger
2. Connect the Supplies
IMPORTANT! Kinked or twisted supply hoses can restrict water
flow. Use extreme care to avoid kinking and twisting the supply
hoses.
Install two 3/8" supply tees with supply stops below the
mounting surface. Ensure the supply tees do not interfere with
items below the sink.
NOTE: If the supply hoses must be coiled, maintain an inside coil
diameter of at least 3" (76 mm).
Connect and tighten the supply hoses to the supply tees.
Feed the sidespray hose with the sidespray through the handle
assembly until the sidespray is properly seated.
Connect and tighten the sidespray hose inlet to the valve body
outlet.
Kohler Co.
Sidespray
Sidespray Hose
Valve Body
3/8" Supply
Tees with
Supply
Supply Stops
Hoses
5 1217379-2-A