ELC...
If you press the Setup switch when the ELC... submenu is selected,
the corresponding screen appears. You can make the ELC (Elec-
tronic Light Control) function active or not.
CAMERA ID
IRIS
SHUTTER
AGC
MOTION DET
DAY/NIGHT
WHITE BAL
PRIVACY
SPECIAL
RS-485
EXIT
Like the same as the ALC configuration, you can set the BLC zone
and assign the level of the high speed shutter.
SHUTTER
❚
The SHUTTER menu is used to set the high speed electronic
shutter and AUTO low speed shutter.
The high speed electronic shutter can be used 7 different speeds
and is commonly used for imaging fast moving objects.
(NTSC: from 1/100 to 1/10K, PAL: from 1/120 to 1/10K ). The low
speed electronic shutter can be any of 13 speeds from X2 to X256
and it slows the shutter speed to make images clearer in dark
illumination. If you select an AUTO low speed, the shutter speed is
automatically lowered depending on the darkness level.
22
22
OFF...
ELC...
OFF
HIGH
ON...
DAY...
ATW2
OFF
...
...
QUIT
CAMERA ID
IRIS
SHUTTER
MOTION
MOTION DET
DAY/NIGHT
WHITE BAL
PRIVACY
SPECIAL
RS-485
EXIT
(ELC)
BLC
LEVEL
RET
OFF
ALC...
AUTO X4
SLOW
OFF
DAY...
ATW2
OFF
...
...
QUIT
OFF
( 0) � � � � I � � � �