Mode 2L (Two Independent Loads); To Skipper / Pop Series Remote Controls; To Giro Series Remote Controls - Cherubini A510073 Manual De Instrucciones

MODE 2L (two independent loads)

This mode allows you to control the Led Dimmer RX outputs
independently from each other.
Skipper/ POP series remote controls
Button B (stop) turns outputs 1 and 2 on and off in the sequences below:
1 1
B B
2 2
ON 1/2 OFF 1/ON 2
With the outputs switched on, each time the button is pressed long (>1sec),
outputs 1 and 2 both change in brightness as in the indications below:
DIM+ 1/2
+ +
-
Button A
A
increases the
brightness of
the outputs
GB
2
1
that are on.
1 1
B B
2 2
ON 1/OFF 2 OFF 1/2
DIM- 1/2
+ -
Button C
decreases the
brightness of
the outputs
2
1
that are on.
Giro series remote controls
The STOP Button turns outputs 1 and 2 on and off, as in the sequence:
1 1
2 2
STOP
STOP
ON 1/2 OFF 1/ON 2
With the outputs switched on, with each long rotation (>1 sec),
outputs 1 and 2 both change in brightness as in the indications below:
- + +
UP
1 2
DIM+ 1/2
26
1
2
STOP
ON 1/OFF 2
Rotate in the UP
or DOWN direction
to change the
brightness of
DOWN
outputs 1 and 2.
DIM- 1/2
1
2
STOP
OFF 1/2
+
-
1 2