To A530058 Remote Control With 4 Independent Channels; To Button Connected To The Wired Switch - Cherubini A510073 Manual De Instrucciones

A530058 remote control with 4 independent channels
Each time the programmed button is pressed briefly (<1 sec), outputs
1 and 2 are turned on and off, as indicated in the sequence:
• The first time the button is pressed it turns on both outputs.
• The second time the button is pressed it turns off output 1 and on
output 2.
• The third time the button is pressed it turns on output 1 and turns
off output 2.
• The fourth time the button is pressed it turns off both outputs.
Command sequence example:
1 2
1 2 1
ON 1-2 OFF 1 ON 2
With the outputs switched on, each time the programmed button is
pressed long (>1 sec), outputs 1 and 2 both change in brightness: the
first time they increase in intensity, the next time they decrease and so
on, alternating. The switched off outputs do not change.
3 4
2 1 2
ON 1 OFF 2 OFF 1-2
Button connected to the wired switch
Each time the button is pressed briefly (<1 sec), outputs 1 and 2 are
turned on and off, as indicated in the sequence.
• The first time the button is pressed it turns on both outputs.
• The second time the button is pressed it turns off output 1 and on
output 2.
• The third time the button is pressed it turns on output 1 and turns
off output 2.
• The fourth time the button is pressed it turns off both outputs.
Command sequence example:
1
1 2 1 2
ON 1-2
With the outputs switched on, each time the button is pressed long
(>1 sec), outputs 1 and 2 both change in brightness: the first time
they increase in intensity, the next time they decrease and so on,
alternating. The switched off outputs do not change.
27
2 3
1 2 1
OFF 1 ON 2 ON 1 OFF 2
4
2 1 2
OFF 1-2
GB