Publicidad
26
P
lacing and Leveling
Please ensure that transit restraint has been removed before operating your machine.
1
Place the machine on a flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2 cm to the right side
and left sides of the machine for ease of installation. At the
rear, a minimum clearance of 10 cm is suggested.
NOTE
If the washer is installed on a uneven, weak or tiled floor causing excessive vibration, spin failure or " "
error can happen to it.
It must be placed on a firm and level floor to prevent spin failure.
2
Check that the machine is level
Open the lid and look from above to see if it is same as shown.
3
Leveling the machine
Lift the front of the washing machine and twist the Adjustable
Leg until washing is placed evenly.
* Installing the Anti-Rat Cover (option) Insert the anti-rat cover to be firmly fixed from the back or front
of washing machine and screw it.
Caution
If the power is supplied from a cord extension or generator, the cord extension set or electrical portable
outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
FRONT
SETTING SCREW
more than 10 cm.
more than
2 cm.
Top view of machine
Adjustable legs
Anti-Rat Cover
more than
2 cm.
Publicidad
