Troubleshooting - Mirabelle GALATIA MIRGA241 Instrucciones De Instalación

3.Push button installation
Cut the adjustment rod to a proper
length, put the push button into the hole.
Trouble Shooting
No partial flush
No flush or flush less after pushing down the
button.
WARNING:
Do not use an in-tank type bowl cleaner in your toilet. In-tank cleaners containing chlorine(calcium hypochlorite)
can seriously damage fittings in the tank. We shall not be responsible for any tank fitting damage caused by the
use of cleaners containing chlorine(calcium hypochlorite).
We will not be liable for damages due to improper handling or installation, abuse, or alteration of the product. We disclaims any responsibility for
incidental or consequential damages.
©2010 Ferguson Enterprises, Inc. All Rights Reserved
Adjust the direction of the push button.
Problem
Distributed Exclusively by Ferguson and Wolseley Canada
Tighten the nut.
Solution
Check the fill water level whether it is higher than
the partial float. If not, adjust the water level
higher or adjust the float lower.
1.Check the button whether it is pushed to the proper
position.
2.Check the button rod whether is too short. If so,
adjust the rod's length.
Full flush. Partial flush.
We disclaim any responisibility for
1471 03/10