Using The Balance; Technical Data - OHAUS Explorer EX125D Manual Del Usuario

Ocultar thumbs Ver también para Explorer EX125D:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
EN-4
MENU & SCREEN NAVIGATION
Touch Menu to open the menu list.
Touch and drag the Scroll bar to view additional items.
Calibration:
Touch to view calibration options.
User Settings:
Touch to view user preferences.
Balance Setup:
Touch to view balance settings.
Application Modes:
Touch to view application modes.
Weighing Units:
Touch to view weighing units.
GLP and GMP Data:
Insert user data for traceability.
Communication:
Touch to view COM Device Settings and Print
Settings.
Library:
Touch to delete all Library records.

3.3 Using the Balance

Weighing Application
1.
If required, place an empty container on the pan and press Tare.
2.
Place the object to be weighed on pan (or in container) to display the weight. When stable, the * appears.
3.
The resulting value is displayed in the active unit.
4. MAINTENANCE
4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
4.2 Troubleshooting
For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the
Ohaus office nearest you.

5. TECHNICAL DATA

The technical data is valid under the following conditions:
Indoor use only
Altitude: Up to 2000 m
Operating Temperature range: 5° C to 40° C
Specified Temperature range: 15° C to 25° C
Humidity: maximum relative humidity 80 % for temperatures up to 30° C decreasing linearly to 50% relative humidity at 40° C
Mains supply voltage fluctuations: up to ± 10% of the nominal voltage
Installation category II
Pollution degree: 2
EXPLORER SEMI-MICRO BALANCE
I/O Settings:
Touch to view remote I/O Settings.
Diagnostics:
Touch to view Diagnostics items.
Factory Reset:
Touch to do a Factory reset.
Lockout:
Touch to access the Lockout menu list.
Information:
Touch to view list of topics.

Publicidad

Tabla de contenido
loading

Tabla de contenido