Safety Instructions - cecotec Rock'nCut Twin Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
ENGLISH

2. SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance. Keep this instruction manual
for future reference or new users.
Make sure that the mains voltage matches the voltage stated on the rating label of the
appliance and that the wall outlet is grounded.
Do not use accessories not provided or suggested by Cecotec, as these could cause
damage to the product or result in risk.
This appliance is designed for household only, do not use for industrial purposes or
outdoors.
Do not place the appliance on unstable surfaces always place it on even, dry and stable
surfaces.
Do not immerse the cord, plug, or any non-removable part of the appliance in water or
any other liquid, nor expose the electrical connections to water. Make sure your hands are
dry before handling the plug or switching on the appliance.
The appliance is designed for slicing food. Do not slice hard baked food, frozen food, food
in plastic or aluminium foil, meat with bones, fruit with hard stones etc.
Check the power cord regularly for visible damage. If the cord is damaged, it must be
replaced by the official Technical Support Service of Cecotec in order to avoid any type of
danger.
Make sure the disc is properly fixed before operating the machine.
To push food against the cutting disc, use the food pusher supplied with this appliance
only.
Do not touch the rotating cutting disc.
If food gets stuck on the cutting disc, remove it with a plastic spatula. Turn the appliance
off and disconnect it from the power supply before cleaning it.
Do not insert fingers or any other items such as knives, forks etc. into the area between
the cutting thickness-setting plate and the cutting disc.
Make sure the cutting disc has completely stopped before removing food.
The machine's maximum time of non-stop operation is 10 minutes. After these 10 minutes,
allow the machine to rest for 15 minutes before operating it again.
Always turn off and disconnect the appliance from the power supply before assembling,
disassembling it or if it is not going to be used for a long period of time. Pull from the plug
and not the cord to disconnect it.
The appliance is not intended to be used by children, persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge.
10
ROCK'NCUT TWIN
02307_Rock n cut_Manual_EA.indd 10
4/9/18 10:15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

02307

Tabla de contenido