Publicidad
Idiomas disponibles
Idiomas disponibles
4. Before You Start
• Unpack the carton carefully and keep all the packing materials until you
ensure that the product is complete and working properly.
• Remove all packaging materials and foils. Retain them for later use. Check
that the appliance has been delivered completely and is in proper condition.
• Wipe the appliance with a damp cloth completely and allow it to dry com-
pletely.
5. Initial use
Inserting/replacing the batteries
1.
To change the batteries, open the battery compartment at the top of the
appliance by unscrewing it.
2.
If you have already inserted batteries, remove the old batteries and insert
two suitable new 1.5V AA batteries according to the correct polarity (+/-).
Pay attention to the small sticker inside the battery compartment and insert
the batteries accordingly.
3.
Close the battery compartment by placing the battery compartment cover
and tightening the screws.
Frothing milk
1.
Fill the milk to be frothed in a tall container. Make sure that the container is
not filled by more than a third.
2.
Immerse the whisk into the container until it almost touches the base.
3.
Turn on the appliance by sliding the "ON/OFF" switch to the "ON" position.
4.
Make slow circular motions until the desired degree of frothing is reached.
Move the beater slowly and evenly up and down during the process. The
whisk should always remain in the milk.
5.
Turn off the appliance by sliding the "ON/OFF" switch to the "OFF" position.
6.
Remove the beater from the milk once it stops.
7.
Clean the appliance as described under "Cleaning and care".
•
We recommend the use of milk with at least 3% fat content.
•
For a better result, heat the milk before frothing. Please note that the milk must not
be warmer than 70°C.
10
English
Publicidad
