Lorell Value Serie Manual Del Usuario página 10

Step 10
Roll out the Bottom Drawer and insert the
2 each Hangrail (13) onto the Drawer Side
Panel (I).
With the use of a Hanging File Folder,
attach the File Bracket (14) so that when
the File Support (15) is attached the
proper spacing to support the folder is
correct.
Repeat the above steps for the Top
Drawer.
Step 11
Insert 7 each Cam Screws into the Top
Panel (F) with a Phillips Screw Driver.
Install the Top Panel (F) onto the cabinet
so that the Cam Screws (1) and Wood
Dowels (5) properly engage with the Cam
Locks (2) and holes provided. With a
Phillips Head Screw Driver rotate the cam
locks on the back of the unit 1/2 turn
clockwise until snug. Open the top
drawer of the cabinet and rotate the two
cam locks 1/2 turn clockwise until snug.
DO NOT OVERTIGHTEN.
You have now successfully completed the assembly of this unit.
Thank you for your purchase!
LLR44521/44522_071904 Page 9 of 27