Lorell Value Serie Manual Del Usuario página 7

Step 5
Attach the Left Side Panel (A) to the
partially assembled unit containing the
Back Panel (C), Bottom Panel (D) and
Front Panel (E). Make sure that the Cam
Screws (1) located on the Left Side Panel
properly engage with the Cam Locks (B).
With a Phillips Screw Driver rotate the
cam lock 1/2 turn clockwise until snug.
DO NOT OVERTIGHTEN.
Step 6
I
On the 4 each Drawer Side Panel (I)
Drawer Side Panel
(Right Side View)
attach the File Drawer Suspension Drawer
20
Slide (20) using 3 each M4X10 Screw
7
16
(16) per slide. NOTE: TWO OF THE
SLIDES ARE LEFT SIDE ATTACHED
16
AND TWO NEED TO BE RIGHT
SIDE ATTACHED. SEE DRAWING
FOR POSITIONS.
NOTE DRAWING FOR INITIAL
I
Drawer Side Panel
SCREW PLACEMENT AS THIS
(Left Side View)
DETERMINES THE PROPER
20
ALIGNMENT OF THE SLIDE
On the 2 each Right Side Drawer Side
16
Panel (I) attach a Lock Clip (7) with 2
each M4X10 Screw (16) in the position
shown on the drawing.
LLR44521/44522_071904 Page 6 of 27