Lorell Value Serie Manual Del Usuario página 9

Step 8
Using Pliers, screw the Innerlock
Eyehook (8) into the Back Panel (C) in
the hole located in the center of the panel.
Insert the completed Lower Drawer into
the cabinet ensuring that the File Drawer
Suspensions lock securely in place.
On the back of the Lower Drawer attach
the Innerlock Strip (9) with M4X26 Bolt
(12), Washer D12 (11) and Nut M4 (10).
Note the proper position of the washer in
the drawing.
Step 9
Insert the completed Upper Drawer into
the cabinet ensuring that the File Drawer
Suspension locks securely in place.
On the back of the Upper Drawer attach
the other end of the Innerlock Strip (9)
with a M4X26 Bolt (12), Washer D12 (11)
and Nut M4 (10). Note the proper position
of the washer in the drawing.
LLR44521/44522_071904 Page 8 of 27