ACCESSORIES INCLUDED:
Hardware bag (plastic ziplock bag) contains the following:
-Two 3/8" dia. x 2 3/4" Lag Screws (10mm x 77mm)
-Two plastic anchors for Solid Masonry (Length 47 mm or 1.85")
-(16) shelf support clips in a small zip lock plastic bag
-Decorative hinge plastic caps shall be a gold fi nish with matching handles
-Removable Shelf.
DISCLAIMER:
Please note:
Homak Safes are DOJ-rated for security testing in performance and durability.
PLEASE NOTE:
Door can be removed to reduce weight when relocating safe.
EXAMPLE
LOCKSMITH INSTRUCTIONS FOR
12 GUN AND 16 GUN SAFE MODELS:
ACCESSING THE LOCKING MECHANISM:
The locking mechanism can be accessed by removing the door panel
located on the inside of the safe door.
NOTE: It is Highly recommended that this work be done by a locksmith
or trained technician to avoid serious injury or damage to safe door or
locking mechanism.
Once safe is open,
lift door straight up
to seperate hinge.
- 2 -
Door Hinge
Pin connected
to the door hinge
must be raised
completely out
to remove door.
Safe Hinge