Homak HS40221120 Guía De Utilización Y Directivas De Funcionamiento página 4

Barrel rests slide into place as shown in
illustration below.
Plastic Barrel rest mounting bars can be clipped
together to extend mount.
EACH INDIVIDUAL SAFE IS ASSIGNED A COMBINATION CODE
WHICH IS PRINTED ON THE BACK OF THIS MANUAL
HOW TO UNLOCK SAFE:
1. Turn dial clockwise three times around and then stop at the fi rst combination number
given in your combination code.
2. Turn dial counterclockwise twice around and then stop at the second combination
number given in your combination code.
3. Turn dial clockwise once around then stop at the third combination number given in your
combination code.
4. Turn handle/spoke clockwise and pull door open.
HOW TO LOCK SAFE:
1. Close the door.
2. Turn the handle /spoke counterclockwise to the locked position.
3. Turn the dial either direction to clear the combination and secure the safe properly.
CAUTION:
This safe is not recommended for storing CDs, memory cards, photography/digital
imaging equipment, and/or other electronic devices.
Behind the barrel rest mounting bar and under
the velcro backing there are snap lines in the
plastic. This is an optional feature that allows
the owner of the safe to provide a custom
configuration for mounting several guns of
different lengths. Cut the velcro strip in the
section of mounting bar marked with
notches, as shown below. Once Velcro is cut the
mounting bar can be snapped easily as shown
in photo below.
- 4 -