Krups FULLY AUTOMATIC EA89 Serie Manual De Instrucciones página 35

Ocultar thumbs Ver también para FULLY AUTOMATIC EA89 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 133
The coffee is too lightly coloured
or too weak.
The appliance is not producing
coffee.
A power failure occurs during a
cycle.
Your tea is not hot enough or
too hot.
You have used ground coffee
instead of coffee beans.
Appearance of steam under the
lid of the grain tray.
After preparing a drink, if you ask
for an extra shot the machine
tells you that this is not possible.
Danger : Only a qualified technician is authorised to carry out repairs on electrical wiring and carry out work on
the electrical grid. If you do not follow these instructions, you risk death by electrocution. Do not use an
appliance that is visibly damaged!
Avoid using oily, caramelised or flavoured coffee beans. Check that the coffee
bean container has coffee in it and that is it dispensing correctly.
Decrease the volume of the preparation and increase the strength of your drink
by using the Dark function.
Turn the grinding fineness adjustment dial to the left to make the grounds finer.
Make the drink in two cycles by using the 2 cups function.
A problem has been detected during preparation of the drink.
The appliance has restarted automatically and is ready for a new cycle.
The appliance will automatically restart when the power is switched back on.
Increase or reduce the hot water temperature in the Settings menu.
Use your vacuum cleaner to remove the ground coffee from the coffee bean
container.
Close the cleaning tablet chute beneath the cover.
The coffee grounds collector is full and the extra shot function is not available.
Once your drink has been made, you can prepare an espresso after emptying
the coffee grounds collector.
31

Publicidad

Tabla de contenido
loading

Tabla de contenido