Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Care and Handling
Your Vortexer should be given the care normally required for any electrical appliance. Avoid
wetting or unnecessary exposure to fumes. The finish can be washed with water (after
unplugging) and mild soap or detergents, using a soft cloth or sponge. Avoid exposing any
electrical components of the Vortexer instrument to water, cleaning agents, or other liquid!
Keep the unit clean by immediately blotting any spills. Replacement parts are available
through most laboratory equipment distributors or directly from Heathrow Scientific, LLC.
CAUTION! Unplug from power before cleaning. Do not immerse. Avoid getting any
liquid into the Vortexer housing.
Parts assembly list
To order parts for the Vortexer:
Contact your local distributor or visit www.heathrowscientific.com.
Please specify Part No., quantity and electric voltage.
Part Numbers and Part Names:
HS120327 – Mixing Head Attachment
HS120328 – Central Intermittent Vortexing Pad
HS120422 – 3 additional elastic retention cords
HS120329 – 120V Power Cord with USA UL Plug
HS120330 – 100V Power Cord with Japan PSE Rated Plug
HS120331 – 230V Power Cord with UK Rated Plug
HS120332 – 230V Power Cord with European Rated Plug
HS120333 – 230V Power Cord with Australian Rated Plug
Disposal Responsibilities:
The equipment you purchased may contain hazardous substances that could impact the
environment. Per regulations on electronic devices in the European Community, you
must use the appropriate disposal systems to avoid exposure of these substances to the
environment. The disposal systems will reuse or recycle hazardous materials from your
equipment responsibly.
The crossed-out wheeled bin symbol invites you to use those systems.
If you need more information on the collection, reuse and recycling systems, please
contact your local or regional waste administration. You can also contact us for more
information on the environmental performance of our products.
10
Publicidad
Tabla de contenido
