Canon PIXMA MP450 Guía De Iniciación Rápida página 31

Performing Bluetooth Communication (Optional)
For performing Bluetooth communication, also refer to your mobile phone or PC manual.
1
Turn ON the machine and load the paper in the Auto Sheet Feeder.
(See page 17)
2
Adjust the print settings as necessary. (See page 28)
3
Connect the optional Bluetooth unit BU-20 to the Direct Print Port.
• The blue lamp on the Bluetooth unit BU-20 lights if it is properly installed.
4
Specify the Bluetooth settings as necessary.
• You can set the device name, access refusal, security and passkey. (See the Bluetooth User's
Guide)
1. Press [Menu].
2. Use [ ] or [ ] to select <Maintenance/settings>, then press [OK].
3. Use [ ] or [ ] to select <Device settings>, then press [OK].
4. Use [ ] or [ ] to select <Bluetooth settings>, then press [OK].
5. Use [ ] or [ ] to select the item to set, then use [ ] or[ ] to change the setting.
6. Press [OK] after finishing all settings you need.
5
Start Bluetooth communication.
For details on performing Bluetooth communication, see the Bluetooth User's Guide.
30
Printing Photos From A Wireless Communication Device Chapter 7