Call Channel Programming; Monitor Function; Volume Mute Function - JOPIX MARINE 515P Manual De Instrucciones

9.6.4.- Call channel programming:

Call channel is default as channel 9, you can program the call channel with you most
often-used channel in each channel group for quick recall.
1. Push [CH] to select a desired channel group to be programmed (USA, International, and
Canadian).
2. Hold [16/C] key for 1.5 seconds to select a call channel.
"CALL" and call channel number disappeared.
3. Hold [16/C] again for 3 seconds till it sounds "BEEP" tone and "DUDU" tone to enter call
channel programming mode.
● Channel number blinks.
4. Push [▲] or [▼] keys to select desired call channel.
5. Push [16/C] to confirm and save it, push [CH] to cancel and exit.

9.7.- MONITOR FUNCTION:

The monitor function opens the squelch, monitor useful signal. Check details description
for monitor key setting below.
● Push [MONI] to activate monitor function.
● "BUSY" will blinks and make a sound while monitor function activated.

9.8.- VOLUME MUTE FUNCTION:

The volume mute function can be activated temporarily, when volume set as OF invalid.
1. Hold [VOL/MUTE] key for 1.5 seconds until hear "Di Di" sound to active volume mute
function.
English - 16 -