Automatic Backlight; Lock Function; Vibration Water Draining Function; Scan Modes - JOPIX MARINE 515P Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

9.9.- AUTOMATIC BACKLIGHT:

This function is convenient for night time operation. The automatic backlighting can be
activated in set mode.
● Push any key except [PTT] to turn the backlight ON.
● The backlighting is automatically turned OFF after 5 seconds of inactivity.

9.10.- LOCK FUNCTION:

This function electronically locks all keys except [PTT] and [▲], [▼], [VOL/MUTE],
[H/L/LOCK] to prevent accidental changing of the channel and function access.
● Push and hold [LOCK] key for 1.5 seconds to turn the function ON and OFF.

9.11.- VIBRATION WATER DRAINING FUNCTION:

This transceiver uses a new technology to clear water away from the speaker grill:
Vibration. Vibration helps drain water away from the speaker housing (water that might
otherwise muffle the sound coming from the speaker).
This transceiver emits a vibrating beep when this function is activated.
● Push and hold [SCAN] and [HI/LO] keys.
● A low beep tone sounds for 9 seconds to drain water, regardless of volume level setting.
● The transceiver does not perform key operations while the vibration function is activated.
The vibration function cannot be activated when an optional speaker-microphone is
connected.

9.12.- SCAN MODES:

Scanning is an efficient way to locate signals quickly over a wide frequency range. The
transceiver has priority scan and normal scan.
● Weather channels will be scanned also when weather alert function is activated.
● Set TAG channels before scan. Cancel TAG for channels not need to be scanned.

9.12.1.- Normal scan:

It searches through all TAG channels in sequence. However, unlike priority scan, channel
16 is not checked unless channel 16 is set as a TAG channel.

9.12.2.- Priority scan:

A priority scan sequentially searches through all TAG channels while monitoring channel
16. When a signal is detected on channel 16, the scan pauses until the signal disappears.
When a signal is detected on a channel other than channel 16, the scan switches to dual-
watch, until the signal disappears.
English - 17 -

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Productos relacionados para JOPIX MARINE 515P

Tabla de contenido