連 接 到 Interceptor; 設 定 Interceptor - Riverbed SteelHead Manual De Instrucciones

Interceptor
4. 連 接 到 Interceptor


1


5. 設 定 Interceptor

操 作

Step 1:Hostname? Interceptor
Step 2: Use DHCP? no
Step 3: Primary IP address? 172.8.1.1
Step 4: Netmask? 255.255.0.0
Step 5: Default gateway? 172.8.1.254
Step 6: Primary DNS server? 172.8.1.10
Step 7: Domain name? domain.com
Step 8: Admin password? xxxyyy
Interceptor
執 初 始 之

CLI 合
Interceptor > enable
Interceptor # configure terminal
Interceptor (config) # interface inpath0_0 ip address 10.0.0.10 /24
Interceptor (config) # ip in-path-gateway inpath0_0 10.0.0.1
Interceptor (config) # in-path interface inpath0_0 enable
Interceptor (config) # write memory
Interceptor (config) # service restart
Getting Started Guide
Installing SteelHead Product Family Appliances (Traditional Chinese)
Console
9600, 8 data bits, no parity, 1 stop bit, no flow control
HyperTerminal Tera Term Pro
admin password
須
IP
例
9600 8
131