Riverbed SteelHead Manual De Instrucciones página 27

Installing and Deploying the Mobile Controller
Appliance Parameter
SteelHead Mobile Data Store Size. At least 1 GB of disk space is required for the data store. The default value
is 10 MB.
Note: You only need this value if you choose not to use the default MSI package (containing
default acceleration and endpoint policies) that ships with the Mobile Controller.
Maximum Log Size. The default value is 5000 KB.
Note: You only need this value if you choose not to use the default MSI package (containing
default acceleration and endpoint policies) that ships with the Mobile Controller.
Maximum Number of Log Files. The default value is 2.
Note: You only need this value if you choose not to use the default MSI package (containing
default acceleration and endpoint policies) that ships with the Mobile Controller.
VPN Port Number. When you deploy Mobile Controller components, you need to ensure
that the VPN tunnel is not optimized. If the VPN tunnel uses TCP for transport, when you
configure the acceleration policy, add a pass-through rule for the VPN port number
connected to by the client. Depending on your deployment scenario, this rule might be the
first rule in the list.
For details about acceleration policies, see the SteelCentral Controller for SteelHead Mobile
User's Guide.
VPNs that use IPSec as the transport protocol do not need a pass-through rule. This is
because IPSec is its own non-TCP/IP protocol and, by default, SteelHeads do not optimize
it.
For detailed information about pass-through rules, see the SteelCentral Controller for
SteelHead Mobile User's Guide.
Make sure you have enough memory on SteelHead Mobile clients to run the Mobile Controller.

Data Store Size (GB)
1
2
5
10
15
20
Getting Started Guide
Memory Usage (MB)
81
100
112
161
171
228
Installing SteelHead Product Family Appliances (English)
15