Troubleshooting - Danby DCR016A3BDB Guía De Utilización Y Cuidado Para El Propietario

Troubleshooting

Occasionally, a minor problem may arrise, and a service call may not be necessary- use this troubleshooting guide for a
possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby's Toll Free
Number for assistance.
PROBLEM
1) Does not work.
2) Refrigerator runs
continuously.
3) Internal temperature
not cold enough.
Tel: 1-800-26-
POSSIBLE CAUSE
• No power to unit.
• Power cord is unplugged.
• Wrong voltage is being used.
• Temperature set too warm.
• Door is not closed.
• Hot food inserted.
• Door opened too long or too often.
• Close proximity to heat source or direct
sunlight.
• No power to unit.
• Power cord is unplugged.
• Temperature control too low.
• Door is not closed.
• Hot food inserted.
• Door opened too long or too often.
• Air flow obstruction.
• Wrong voltage is being used.
• Close proximity to heat source or direct
sunlight.
(1-800-263-2629)
• Check connection of power cord to
power source.
• Plug in unit.
• Use proper voltage.
• Set temperature higher.
• Close door securely.
• Be sure food is at room temperature before
inserting.
• Minimize door openings/duration.
• Do not place unit close to heat sources
or direct sunlight.
• Check connection of power cord to
power source.
• Plug in unit.
• Check setting and increase as needed.
• Close door securely.
• Be sure that food is at room
temperature.
• Minimize door openings / duration.
• Allow room for air to circulate around
unit.
• Use proper voltage.
• Do not place unit close to heat sources
or direct sunlight.
4
SOLUTION