Publicidad
Step 15
Refer to the enlarged diagram to identify the parts
å
on the HINGES.
The DOORS may need some adjustments. Follow
å
the text below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal),
turn the adjusting screw in or out.
To adjust the DOORS up and down (vertical), loosen
å
both vertical adjustment screws. Move the DOORS
up or down to the desired location. Tighten the
screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the
å
mounting screw one turn and move the DOORS in
or out, as needed. Tighten the mounting screw after
making adjustments.
Adjusting screw (horizontal)
Page 20
Mounting screw (depth)
(vertical adjustment)
411843
www.sauder.com/services
Publicidad
