Storage; Maintenance; Cleaning - Imetec L1105 Manual De Instrucciones

Cold air shot button (3C)
If the appliance is equipped with this button, it can be used
to set the styling.
• If this button is pressed while the appliance is on, the hot
air cools down and the set style lasts longer.
• Once the button is released, the appliance returns to a
hot air flow at the selected level.
Ioniser (7) (if present)
The appliance has an ionizer featuring ION
technology. This function is automatically
activated when the appliance is switched
on. The LED (7) indicates proper operation.
When the hair dryer is not used, unplug the appliance from the
socket and store it in a dry and dust-free place.
Do not wind the power cord around the appliance. Coil it
up loosely without bending it.
Cleaning the appliance and accessories
Clean the appliance and the accessories (diffuser, nozzle)
with a damp cloth when needed. Do not use solvents or other
aggressive or abrasive detergents. Otherwise, the surface
could be damaged.
Check the intake opening of the appliance regularly and
remove all hair and dust.
Cleaning the intake filter (5A)
If the appliance is provided with an intake filter, clean it as
follows:
• Open the filter cap (5B) as shown in the figure.
• Wipe the front and rear of the retina (5A) and the filter cap
(5B) with a damp cloth.
• Let the parts dry well and put them back on in inverse
order.
MI001463.indd 13

STORAGE

MAINTENANCE

IMPORTANT! Switch the appliance off and
unplug it from the socket before cleaning!
Make sure all cleaned parts are completely dry
before reusing the appliance!

CLEANING

13
EN
09/12/2013 17:54:46