Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT!
The appliance must be installed following the
manufacturer's
manufacturer will not be liable for injury to
persons or animals or property damage
caused by an incorrect installation.
The electrical connections of the appliance
must be carried out in compliance with the
provisions and standards in force.
When the appliance is connected to the
electricity main by a socket:
letter L (live) = brown wire;
letter N (neutral) = blue wire;
earth symbol
= green - yellow wire.
When the appliance is connected straight to the
electricity main:
instructions.
The
Before performing any service on the electrical
part of the appliance, it must absolutely be
disconnected from the electrical network.
If the installation requires modifications to
the home's electrical system or if the socket
is incompatible with the appliance's plug,
have changes or replacements performed by
professionally-qualified person. In particular,
this person must also make sure that the
section of the wires of the socket is suitable
for the power absorbed by the appliance.
WARNINGS:
all our products are conform with the
European Norms and relative amendments.
The product is therefore conform with the
requirements of the European Directivesin
force relating to:
- compatibility electromagnetic (EMC);
- electrical security (LVD);
- restriction of use of certain hazardous
substances (RoHS);
- EcoDesign (ERP).
Publicidad
