Laser Classification; Safety Instructions - Instrumax CONSTRUCTOR 360 4V Manual Del Usuario

6
Pack it up only if it is perfectly dry. Transport in original con-
tainer/case only.
Note: During transport On/Off compensator lock (4) must be
set to position "OFF". Disregard may lead to damage of com-
pensator.
Specific reasons for erroneous measuring results
• Measurements through glass or plastic windows;
• Dirty laser emitting window;
• After instrument has been dropped or hit. Please
check the accuracy;
• Large fluctuation of temperature: if instrument will
beused in cold areas after it has been stored in warm
areas (or the other way round) please wait some
minutes before carrying out measurements.
Electromagnetic acceptability (EMC)
• It cannot be completely excluded that this instrument
will disturb other instruments (e.g. navigation systems);
• will be disturbed by other instruments (e.g. intensive
electromagnetic radiation nearby industrial facilities or
radio transmitters).
Laser class 2 warning label on the laser instrument

Laser classification

The instrument is a laser class 2 laser product accortding to
DIN IEC 60825-1:2007 and Class II in accordance with CFR
21 § 1040 (FDA). This tool may be used without need for
further protective measures.

Safety instructions

Please follow up instructions given in operators' manual. Do
not stare into beam. Laser beam can lead to eye injury (even
from greater distances). Do not aim laser beam at persons
or animals.
The laser plane should be set up above eye level of per-
sons. Use the instrument for measuring jobs only. Do not
open instrument housing. Repairs should be carried out by
authorized workshops only. Please contact your local dealer.
Do not remove warning labels or safety instructions.
Keep instrument away from children. Do not use instrument
in explosive environment.
5